diff --git a/Power sensor holder for Zeiss Lightsheet 7/README.md b/Power sensor holder for Zeiss Lightsheet 7/README.md index 5a3a82bdc34fa5709a493d64feabffc5af81a226..f874cbe5755a4da15571e007e390e2076fd8aa6a 100644 --- a/Power sensor holder for Zeiss Lightsheet 7/README.md +++ b/Power sensor holder for Zeiss Lightsheet 7/README.md @@ -3,20 +3,26 @@ Power sensor holder developed for Zeiss Light sheet 7. It is compatible with the model X-Cite XR2100 power sensor. This is used for routine laser power measurements on this Zeiss microscope system. - +**3D model of power sensor holder:** +<img src="image.png" width=70%> + +**Printed holder placed in the microscope:** +<img src="image-1.png" width=70%> - ## How to use The dimensions of this model are similar to the chambers used for imaging in this microscope system. It can be used for both right and left side illuminations. This holder is designed in a way that the Light sheet will be centered in the power sensor window (see software settings below in more detail). To measure laser power from the right-side illumination, place the laser power sensor in the slit on the right side, with the sensor window facing left (user perspective), as shown in the photo: - +**Sensor position for right illumination:** +<img src="image-2.png" width=70%> + To measure laser power from the left-side illumination, place the laser power sensor in the slit on the left side, with the sensor window facing right (user perspective), as shown in the photo: - +**Sensor position for right illumination:** +<img src="image-3.png" width=70%> ### Software settings